A8 Series

The A8 series of switches and pilot devices offer the extreme in space savings. With only an 8mm panel cutout, they are ideal for high density or very small control panels such as handheld devices. Low level snap acting contacts are ideal for PLC inputs, timer triggers, sensor triggers, or any other type of logic level switching. LED lamps are replaceable unlike most other switches and pilot lights of similar size. With a choice of round square or rectangular button heads, 5 colors, and either momentary or maintained (push-on/push-off) action there is sure to be a model to meet your needs.

AP Series

The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 5V DC, 12V AC/DC or 24V AC/DC; there are also optional snap-on transformers and a DC-DC converter to support higher voltages.

AP22M Series

AP22M Series Available in 12V DC, 24V AC/DC or 120V AC, the AP22M series of pilot lights use high-intensity LEDs to provide ultra-bright visibility even in direct sunlight! These lights are perfect for use in applications located in dirty environments, or with high ambient light levels, such as waste water treatment plants, car washes, and solar or outdoor control panels. AP22M is available in six vibrant color lenses or with a clear lens to provide sharper contrast between lit and unlit. When viewed from the side, these lights provide illumination up to 100 times brighter than a standard pilot light. You need to see it to believe it!

ARN Series

The ARN series of mono-lever switches are an ideal solution for such applications as table or tool X-Y positioning. These switches mount into a standard 30mm round panel cutout and offer up to four directions of control. Three styles of handle include the standard lever, a short lever that helps prevent person from bumping into it, and an interlocking lever that requires an operator to deliberately pull on a release mechanism before activating the switch. Lever action can be maintained or momentary (spring return) in any combination. Typical applications include tool positioning and security camera control (tilt and pan).

AS1 Series

The photoelectric light grids of the AS1 series are crossed-beam area sensors able to detect all objects,as small as a 0.2mm thickness, inside a 100mm height, over operating distances reaching 3m between emitter and receiver.

BA Series

The BA series of terminal blocks features a one-piece construction that makes installation very simple. Available in current capacities from 10A to 40A, all models are made from UL94-V0 material for excellent flame and heat resistance. All models mount onto standard 35mm DIN rail. Fuse holders for 1/4 X 1-1/4 size fuses include optional blown fuse indication.

BN Series

Sectional DIN rail terminal blocks. The BN Series has current ratings up to 150A and fuse holders with optional blown-fuse indication. The BNH series has touch-down terminals, current ratings up to 50A. The BN/BNH spring loaded are 10A-50A while the not spring loaded are 10A - 150A (modular build as needed)

BX Series

The BX series of terminal blocks provides a wiring junction for MIL-style ribbon cables. Available in several industry standard and PLC MIL connector models, with screw terminals or our unique touch-down terminals, the BX series also features a highly visible hinged marking strip to clearly label connections and terminations. Like all other IDEC terminal blocks, they are UL and CSA approved, with excellent flame and shock resistance, and are DIN-rail mountable.

CS CAM Switch Series

The CS series of cam switches offer the ultimate in selector switch flexibility. Available up to 12 positions, with up to 20 contacts they can meet almost any selection need. Choose from four different detent angles. Staggered screw terminals allow for easy wiring, and a large variety of handle styles are available (including key operated) to satisfy almost any demand either aesthetic or functional. Standard contact configurations are available, but customization is what cam switches are all about.

CW Series

The IDEC commitment to assuring safety in all operating environments has resulted in stylish, compact and space-saving switches and pilot devices. The innovative two-step locking lever integrated with a guard provides a higher level of safety, and the low projection from the panel surface reduces the possibility of unexpected activation or operator damage. The CW series add a sleek and stylish image to the panel with black or metallic bezels. The shortest depth behind the panel in its class contributes to reducing machine and control panel size.

DATAVS1 Series

The DATAVS1 series is the easiest solution for the machine vision applications. DATAVS1 relies on the concept of a completely embedded vision sensor. The setup is very quick and intuitive thanks to the VSC unit, the external configurator with 3.5” colour display and pushbuttons. No PC is needed for the configuration. The image processing is completely carried out inside the sensor, which is able to work in stand alone mode after the setup. The VSC unit can provide a real time monitoring of the images, but it is not required during the functioning of the sensor and so it can be disconnected and used to setup multiple sensors. DATAVS1 allows a single control on each image, but offers different kind of tools to solve several tasks: product orientation on conveyor belts, presence/absence on assembly lines, overprinting controls on packaging machineries.